Follow the steps below to replace the toner bottle in your Ricoh 1515, MP 161, MP 171, MP 201, or MP 301 copier. (The instructions are the same, but these models do not all use the same type toner.)
- Open the copier's front door
- Pull up on the green handle on the toner unit
- Push in on the small green lever on the left side of the toner unit
- Slide the toner unit out using the green handle
- Remove the old toner bottle
- Unscrew the black cap from the new toner bottle
- Lay the new toner bottle on the toner tray, top of the bottle facing toward you
- Push the toner unit all the way in using the green handle until it locks in place
- Push the green handle down into place
- Close the copier's front door
No comments:
Post a Comment