How to remove the hard drive from a Dell Latitude D610 laptop

On desktop computers, removing a hard drive can be a time-intensive procedure.  Typically you have to open the computer's case, disconnect the hard drive's data and power cables, and remove or unscrew the hard drive.  But on a laptop, where everything is smaller and more accessible, removing a hard drive is often much simpler.

To remove the hard drive from a Dell Latitude D610 laptop:

1. Locate the hard drive

With the computer powered off, disconnect all cables, including the AC power cable.  Remove the battery and place it somewhere safe.  (If you need help removing the battery, see this guide for step-by-step instructions: How to remove the battery from a Dell Latitude D610 laptop.)

Close the computer's lid and turn the laptop over so you're looking at the bottom.  You'll see several different panels and many small screws.  As you're looking at the bottom of the computer, with the fan vent in the upper right corner, the hard drive will be located in the lower right corner, next to the battery compartment.  There is a rough rectangular outline to the hard drive bay (about 3" by 5") that you can use to identify where it is.

2. Remove the screws

Two screws secure the hard drive; these are located along the right side of the hard drive bay.  In the lower right corner of the laptop, you'll see a screw that's sunken into the laptop case -- the first hard drive screw is located just above this case screw.  The second screw is located along the right side of the laptop, about three inches above where the first screw was.  Remove both screws using a small Phillips screwdriver, and place them somewhere safe.

3. Remove the hard drive

With the screws out, the hard drive can slide right out of the computer.  There's a ridged panel located along the lower right side of the laptop, between the two screws you just removed.  This panel is connected to the hard drive.  Grip this panel and slide it out of the laptop, to the right.  It may be hard to remove, but if you apply additional force, be sure to slide the panel out straight, rather than at any sort of angle, to avoid damaging the hard drive or laptop.

🛈 While you have the hard drive out, now is a good time to clean out any dust or debris that has built up in the hard drive cavity.  You can blow it out with a can of compressed air or wipe it clean with a lint-free rag.

(Originally published on Helium.com, 2011)